A diving regulator is a device used by a SCUBA diver in an Aqualung to supply the diver with breathing gas at ambient pressure from a high pressure diving cylinder.

Table of contents

1 Parts of a regulator 2 First Stage 3 High pressure hose 4 Low pressure hose 5 Contents guage 6 Demand valve 7 Pressure relief valve 8 Old style twin hose regulators 9 Performance of regulators 10 Links to Manufacturers

Parts of a regulator

The main components of a diving regulator are:

• the first stage
• the high pressure hose
• the contents guage
• one or more 'low pressure'' hoses
• one or more demand valves or second stages
• a pressure relief valve

The main purpose of the first stage is the take gas from the diving cylinder at pressures of 200 bar to 300 bar (3000 psi to 4700 psi) and reduce its pressure down to 10 bar (140 psi) higher than ambient pressure. The first stage has either an A clamp or a DIN fitting to connect to the ''pillar valve of the diving cylinder.

High pressure hose

The high pressure hose takes gas, at cylinder pressure, direct from the inlet of the first stage to the contents guage.

Low pressure hose

A regulator often has several low pressure hoses. These connect the first stage to the demand valves and supply gas to the demand valve. Some low pressure hoses are known as direct feeds. They supply gas to the diving suit and the buoyancy compensator inflation valves. The first stage delivers gas at about 10 bar above ambient pressure to low pressure hoses.

Contents guage

The contents guage measures the gas pressure in the diving cylinder so the diver knows how much gas remains in the cylinder.

There are several types of contents guage:

• The standard type is an analogue guage that can be held in the palm of a hand and is connected to the first stage by a high pressure hose. Sometimes they are fixed in a console, a plastic or rubber box, that holds the air pressure gauge and one or more of a depth gauge, a dive computer and a compass.
• Button guages are coin-sized, analogue guages that are connected directly to the first stage. They are often used on decompression cylinders. Due to their small size, it can be difficult to read the quage to a resolution of less than 20 bar / 300 psi.
• Air integrated computers. Some dive computers are designed to measure, display and monitor the diving cylinder pressure. Although this can be very beneficial to the diver, it does mean that if the dive computer fails, the diver can no longer monitor his or her gas reserves. The computer is either connected to the first stage by a high pressure hose or has two parts, the pressure transducer on the first stage and the display at the wrist or console, which communicate by radio link.
• In the past, some types of diving cylinder had a mechanical reserve release lever that provided a warning to the diver that the gas supply was nearly exhausted

Pressure relief valve

A pressure relief valve is a safety device that must be used if no demand valves are present on the resulator. It allows gas to escape from the firststage, without over pressurising any other regulator components, such as dry suit or buoyancy conpensator inflation valves, in the event of a first stage high pressure malfunction.

Normally, if present, a demand valve will vent off the excess gas from the first stage safely. If there is neither a demand valve nor a pressure relief valve there is a danger the excess gas will vent to the buoyancy compensator or dry suit resulting in excess buoyancy causing a lethal, rapid ascent to the surface.

Old style twin hose regulators

Earlier models of regulators had the two stages combined into one. Air was supplied to the diver via a large corrugated hose to the divers mouth piece. Exhaled gas returned via a second hose back to the regulator where it was released into the water. The twin hose has reappeared in modern rebreathers.

Performance of regulators

ANSTI has developed a testing machine that measures the inhale and exhale effort in using a regulator. Publication of results of the performance of regulators in the ANSTI test machine has resulted in big performance improvements.

Links to Manufacturers