Fuel pump

Fuel pump

In earlier carss, the fuel pump was housed near the engine. It created negative pressure to "suck" the gasoline through the lines. However, the negative pressure from the pump and heat from the engine caused the gasoline to boil more easily. The gasoline as a vapor could not be handled well by the pump and would restrict liquid gasoline flow, resulting in a condition known as "vapor lock" where not enough gasoline would reach the engine.

Nowadays, the fuel pump is located inside of the gas tank and is usually electric. It creates positive pressure in the fuel lines, pushing the gasoline to the engine. The higher gasoline pressure raises the boiling point, and (possibly?) aids the fuel injection system which sprays the pressurized gasoline through nozzles to mix the gas with air. Placing the pump in the tank puts the component least likely to handle gasoline vapor well (the pump itself) farthest from the engine, submersed in cool liquid. Another benifit to placing the pump inside the tank is that it is less likely to start a fire. Electrical components (such as a fuel pump) can spark and ignite fuel vapors, however liquid fuel is non-flammable and therefore submerging the pump in the tank is one of the safest places to put it.

The fuel pump is generally on whenever the car's ignition switch is in the "on" position. Depressing the gas pedal results in the throttle body opening on the engine (metering the air going in) rather than engaging the fuel pump. The ignition switch does not carry the power to the fuel pump, instead it activates a relay which will handle the higher current load. It is common for the fuel pump relay to become oxidized and cease functioning.